Marine Engineering Short Courses

Registration! Registration!! Registration!!!

The Regional Maritime University – RMU, a world class center of excellence for maritime education and training is pleased to invite prospective applicants to enroll into its newly introduced short courses of the Marine Engineering Department, RMU.

MAXSURF I (Basic)

What is the program about?

The Maxsurf I (Basic) is designed to introduce new users to features of Maxsurf modeler as well as train users in the design of ships. This course will cover user interface, opening of a file, adding and viewing surfaces, manipulating surfaces, sitting up of frame of reference, adding of sections, buttons and waterlines, calculating areas, trimming, sitting of waterlines, decks, frames, calculating hydrostatics and modeling of a ship and many others.

 

BENEFITS TO YOU

At the end of the course the participants will be able:

  • To explore the concept of surface modeling as opposed to solid modeling
  • To differentiate between the types of surface modeling
  • To use surface modeling in 3D and discover the methods employed within the Maxsurf software environment.
  • To carry out simple exercises in the design of various ship types using the knowledge acquired.

WHAT IS COVERED

The course covers the following modules:

  • Module 1-     DEFINITIONS & DIFFERENCES BETWEEN SURFACE MODELING & SOLID MODELING
  • Module 2-     INTRODUCTION TO MAXSURF/ USER INTERFACE
  • Module 3 –    MODELER SETTING
  • Module 4-     SURFACE FITTING
  • Module 5-     WORKING WITH STRINGERS etc.

WHO IS IT FOR?

This course is ideal for students studying Marine Engineering, Nautical Science or Naval architecture. It is also serves as the starting point for persons who wish to develop careers in ship design.

DURATION

The course covers a duration of five (5) Days excluding national holidays. The class will begin with a minimum of five people exhausting 4 hours per day.

COURSE FEE

The course fee for the duration is $350 or GHS equivalent which covers course materials, tuition, student registration, assessments and examinations, practical’s, etc.  

MAXSURF II (INTERMEDIATE)

What is the program about?

The Maxsurf II is designed to equip trainees with the skills for carrying out hull stiffening and reinforcements. Applicants of this program will be able to analyze ship stability and estimate resistance and seakeeping characteristics.

BENEFITS TO YOU

At the end of the course the participants will be able:

  • To carry out a quick review of Maxsurf I
  • Will be equipped to add structures to a model
  • Capable of carrying out stability analysis for a ship
  • To learn how to estimate resistance and powering requirements

 

WHAT IS COVERED

The course covers the following modules:

  • Module 1-     STABILITY & EQUILIBRIUM ANALYSIS
  • Module 2-     RESITANCE & POWERING
  • Module 3 –    MOTION ANALYSIS
  • Module 4-     MATERIALS AND SECTION LIBRARIES etc.

WHO IS IT FOR?

Persons who have successfully completed training in Maxsurf I.

 

DURATION

The course covers a duration of five (5) Days excluding national holidays. The class will begin with a minimum of five people exhausting 4 hours per day.

COURSE FEE

The course fee for the duration is $350 or GHS equivalent which covers course materials, tuition, student registration, assessments and examinations, practical, etc.  

SHIP DESIGN

What is the program about?

The Ship design and maintenance introduces candidates to the basic techniques and tools required to enable proficiency in design. This includes: Methods of designing; Preliminary design; Estimation of dimensions, weights and volumes; Cost estimation project.

BENEFITS TO YOU

At the end of the course the participants will be able:

  • To design a ship from beginning to final stage.
  • To carry out a preliminary design project based on the selection of a marine vehicle of choice

WHAT IS COVERED

The course covers the following modules:

  • Module 1-     DESIGN PHASES
  • Module 2-     DIFFERENT METHODS FOR SELECTING DISPLACEMENT
  • Module 3 –    EMPIRICAL FORMULAS FOR LENGTH ESTIMATION
  • Module 4-     MACHINERY INSTALLATION WEIGHT CALCULATION
  • Module 5-     TYPES OF COST ESTIMATES etc.

WHO IS IT FOR?

Practicing naval architects, marine engineers, shipyard workers, ship designers and students who wish to develop their careers further in ship design and production.

COURSE FEE

The course fee for the duration is $350 or GHS equivalent which covers course materials, tuition, student registration, assessments and examinations, practical, etc.  

DURATION

The course covers a duration of five (5) Days excluding national holidays. The class will begin with a minimum of five people exhausting 4 hours per day.

 

PIPING & INSTRUMENTATION DIAGRAMS

What is the program about?

P&ID introduces candidates to the techniques to understand or identify symbols and function labels commonly found on P&IDS. This program will describe system and components as related to P&ID. Candidates of this program will be able to trace process stream flow and control loop functions between several P&IDs.

BENEFITS TO YOU

At the end of the course the participants will be able:

  • To locate process equipment.
  • To trace process stream flow to and from plant’s battery limits.
  • To describe instrumentation and controls for a process.
  • Explain how the complete process in an area works in terms of equipment, piping, and instrumentation and controls

WHAT IS COVERED

The course covers the following modules:

  • Module 1-     INTRODUCTION TO READING A P & ID
  • Module 2-     P & ID STRUCTURE AND TYPICAL INFORMATION
  • Module 3 –    VALVES IN CONTROL LOOPS AND PRIMARY FLOW ELEMENTS AS PARTS OF A P & ID.
  • Module 4-     HOW TO TRACE A PROCESS FLOW ON A P & ID
  • Module 5-     DEMONSTRATION EXERCISE READING A P & ID and many more.

WHO IS IT FOR?

Seafarers, Technicians, Mechanical engineers, Electrical engineers, Plant Operators, all engineering Students, and others who want to review or learn how to read Piping and Instrumentation Drawings (P & IDs). Workers in the process and power plant industries are eligible to apply.

 

COURSE FEE

The course fee for the duration is $60 or GHS equivalent which covers course materials, tuition, student registration, assessments and examinations, practical, etc.  

DURATION

The course covers a duration of five (5) Days excluding national holidays. The class will begin with a minimum of five people exhausting 4 hours per day.

VENUE FOR THE TRAINING OF ALL PROGRAMS

Lectures for all the short courses will be held on the campus of the Regional Maritime University.

FACULTY

The Programme is facilitated by experienced Instructors of the Marine Engineering Department, RMU.

COURSE DELIVERY STRUCTURE

The mode of course delivery will be on a full-time basis. Training would be held from 9 am-1 pm, and vary according to times for assessment, examinations and practical as stipulated in the course time-table.

FOR FURTHER ENQUIRIES CONTACT:  

Tel: +233(0)302719390 |+233(0)246489836| +233(0)205003366

Email: registrar@rmu.edu.gh, marketing@rmu.edu.gh, isaac.animah@rmu.edu.gh

NOTE: RMU Students are entitled to a rebate of 50% for all the programmes.

32 Responses
  1. That is the finish of this report. Right here you will uncover some web pages that we think you will enjoy, just click the hyperlinks. Henry Westphal

  2. Pretty nice post. I just stumbled upon your weblog and wished to say that I have truly enjoyed browsing your blog posts. After all I’ll be subscribing to your rss feed and I hope you write again very soon!|

  3. Please let me know if you’re looking for a article writer for your site. You have some really good articles and I feel I would be a good asset. If you ever want to take some of the load off, I’d absolutely love to write some material for your blog in exchange for a link back to mine. Please shoot me an e-mail if interested. Thank you!|

  4. Definitely believe that that you stated. Your favourite reason seemed to be on the internet the easiest thing to keep in mind of. I say to you, I definitely get irked even as people think about issues that they just do not realize about. You controlled to hit the nail upon the highest and also outlined out the entire thing without having side effect , other people could take a signal. Will probably be back to get more. Thanks|

  5. Today, I went to the beachfront with my children. I found a sea shell and gave it to my 4 year old daughter and said “You can hear the ocean if you put this to your ear.” She put the shell to her ear and screamed. There was a hermit crab inside and it pinched her ear. She never wants to go back! LoL I know this is entirely off topic but I had to tell someone!|

  6. I was curious if you ever thought of changing the structure of your site? Its very well written; I love what youve got to say. But maybe you could a little more in the way of content so people could connect with it better. Youve got an awful lot of text for only having one or 2 pictures. Maybe you could space it out better?|

  7. I am not sure where you’re getting your info, but good topic. I needs to spend some time learning much more or understanding more. Thanks for fantastic info I was looking for this information for my mission.|

  8. You’re so interesting! I do not suppose I’ve truly read through anything like this before. So nice to find another person with genuine thoughts on this topic. Seriously.. thank you for starting this up. This website is one thing that is needed on the web, someone with a bit of originality!|

  9. This is really interesting, You’re a very skilled blogger. I’ve joined your feed and look forward to seeking more of your excellent post. Also, I have shared your web site in my social networks!|

  10. Hey There. I found your blog using msn. This is a very well written article. I’ll be sure to bookmark it and return to read more of your useful information. Thanks for the post. I’ll definitely comeback.|

  11. I have been surfing online more than three hours today, yet I never found any interesting article like yours. It is pretty worth enough for me. In my view, if all webmasters and bloggers made good content as you did, the net will be much more useful than ever before.|

  12. Today, with the support of a learning specialist and expert guides in music, creative movement, Spanish, drama and physical education, the staff continues to strive for the whole development and individualized learning, which are trademarks of Montessori education worldwide soft tab cialis

  13. The way it works for an enlarged prostate is that it increases your levels of cyclic guanosine monophosphate cGMP which is a vasodilator meaning it makes your arteries and blood vessels wider and helps to ease the symptoms of urinating with an enlarged prostate cialis 5mg

  14. Betpas Mobil Casino. Ocak 9, 2022 ferhat 0. Betpas canlı hizmetler sunan bir bahis oynama sitesidir. Canlı casino servisinde fazla oyun seçeneği yer almıyor. Klasik Rulet, Bakara ve

  15. The medication works by blocking the actions of the hormone, testosterone, which causes an erection and is the primary cause of erections before a man is even able to remember that he is having an erection in the first place cialis generic Does Cialis react with other medicines

Leave a Reply

We are using cookies to give you the best experience. You can find out more about which cookies we are using or switch them off in privacy settings.
AcceptPrivacy Settings

GDPR